Blomberg LDV02284 User Manual Download Page 36

Dishwasher / User manual

35 / 44 EN

7

Troubleshooting

Machine

 

does

 

not

 start.

•  Power cable is unplugged. >>> Check if the power cable is plugged in.

•  Fuse is blown. >>> Check the fuses in your house.

•  Water is cut. >>> Make sure that the water inlet tap is open.
•  Door of the machine is open. >>> Make sure that you have closed the door of 

the machine.

•  On / Off button is not pressed. >>> Make sure that you have turned on the 

machine by pressing the On / Off button.

Dishes are 

not

 washed 

clean

•  Dishes are not placed orderly in the machine. >>> Load the dishes as described 

in the user manual.

•  Selected programme is unsuitable. >>> Select a programme with a higher 

temperature and cycle time.

•  Impellers are stuck. >>> Prior to starting the programme, turn the lower and 

upper impellers by hand to make sure that they rotate freely.

•  Impeller holes are clogged. >>> Lower and upper impeller holes might be 

clogged with food remnants such as lemon pips. Clean the impellers regularly 

as illustrated in section “Cleaning and Care”.

•  Filters are clogged. >>> Check if the filter system is clean. Clean the filter 

system regularly as illustrated in section “Cleaning and Care”.

•  Filters are installed incorrectly. >>> Check the filter system and make sure that 

it is installed correctly.

•  Baskets are overloaded.  >>> Do not overload the baskets in excess of their 

capacity.

•  Detergent is stored under unsuitable conditions. >>> If you are using powder 

detergent, do not store the detergent package in humid places. Keep it in a 

closed container if possible. For ease-of-storing, we recommend you to use 

tablet detergents.

•  Detergent is not sufficient. >>> If you are using powder detergent, adjust 

the amount of detergent according to the soiling degree of your dishes and/

or programme definitions. We recommend you to use tablet detergents for 

optimum results.

•  Rinse aid is not sufficient.  >>> Check the rinse aid indicator and add rinse aid if 

necessary. Increase the rinse aid setting if there is enough amount of rinse aid 

in the machine.

•  Detergent dispenser lid is left open. >>> Make sure that the detergent dispenser 

lid is closed tightly after adding detergent.

Summary of Contents for LDV02284














































Reviews: