31/EN
Operating the product
6-
Keys
On/Off/Programme Selection key
When you use the On/Off/Programme
Selection key to select a programme, the
On Warning control light will become on,
and it will go off when you switch to the Off
position.
Start/Pause/Cancel key
It is used to startup, pause or cancel the
selected program.
Time Delay key
It is used to set the time delay duration.
Preparing the machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with
the instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent compartment.
5. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
6. Close the door of the dishwasher.
Programme selection
1. Press On/Off/Programme Selection key
to switch on the product.
2. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
3. Use the programme selection key to
select the determined programme.
Auxiliary functions
Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soiling,
soiling degree and properties of the dishes
to be washed.
Auxiliary functions are provided in order to
enable you to save time, water and energy
and to perform a more comfortable washing
with conditions specific to you.
Auxiliary functions may cause changes
in the programme duration.
Rapid Clean Function
(Depends on model)
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Super Gloss Function
(Depends on model)
It provides superior drying performance.
Half Load function
(Depends on model)
It is used to operate the machine without
loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off key.
3. Select the desired programme and
press the Half Load key.
While the function is enabled, the Half
Load indicator will come on in the function
selection indicator and on the display.
4. Start the programme by pressing Start
/ Pause / Cancel key.
With the Half Load function you can
save both water and power while using
the lower and upper baskets of the
machine.
Read “Safety Instructions” section first!
Read “Quick Quide” before this
section.
