![background image](http://html1.mh-extra.com/html/blomberg/gss-1380/gss-1380_operation-instruction-manual_2773934001.webp)
23
Water drainage
Connecting the drainage hose.
Take care to ensure that the water intake hose is not bent
or squeezed.
Check that the drainage hose is firmly seated in place.
Extension hoses
If a hose extension is required, a drainage hose of equal
quality must be used
The maximum length must not exceed 4m. Otherwise,
the machines cleaning process is negatively influenced.
Siphon connection
The drainage height must be between 50 and 100 cm
above the floor.
Use hose clamps to fasten the drainage hose to the
siphon.
Electrical connection
Please refer to the type plate for information on current
type, mains voltage, and fuse protection.
The type plate is located on the inside of the door.
The mains plug must be freely accessible after installation.
Power cables and insulated cables must not be accessible
after installation.
A (depends on the model)
The A- system protects you from water damage
which may be caused at the water inlet hose.
Do not immerse the systems valve box into water; it
contains electrical components.
In case of damage, pull out the power supply plug.
Do not shorten or lengthen the hose insert, since it
contains electrical cables and components.
If your machine ever experiences faults in operation,
check the notes and advice in the operating manual.
If this does not fix the problem, our customer service
staff is available to you.
3/4
min 10
A
18
21
01
0
20
30
40
50
60
70
80
90
100
11
0
12cm
min 4cm
max 110 cm
min 50 cm
Service
11
Dear customer,
Before starting, it is essential that you read carefully right
through the installation and operation instruction booklet
before plugging in to the mains socket. The following
instructions should prevent the risk of personal injury
and/or damages to the machine.
Please keep these documents for later reference in a
safe place.
This operating manual has been written for different
machines and some of the features mentioned here may
not apply to your specific machine.