Blomberg GSN 9580 A, Instruction Manual, Page: 27 / 44

25
GB
the machine by pressing Start/Pause/
Cancel Button (
3 ) if you have to open the
door. Pause ( ) Indicator will appear on
the display. Then, open the door. There
may be a rush of vapor when you open
the door of your machine; be careful.
Close the door of your machine and
press Start/Pause/Cancel Button again.
Program will resume running.
WARNING:
Your dishwasher will remain in pause
mode for about 15 minutes in order to
entirely remove the water in the machine
and on the dishes and to protect the
resin in the salt reservoir. And then it will
resume running in drying mode and the
drying step indicator (
17-d ) will turn on.

When the program is over,
“
Finished ” will appear on the
information line. End light will
turn on in Program Steps Follow-
up Indicator and remaining time
indicator will display 00:00.

Turn off your machine by pressing
On/Off button (
1 ).

Close the tap.

Unplug the mains plug from the wall
socket.

Leave your dishes in the machine
for about 15 minutes after they
are washed in order to have them
cooled down. Your dishes will dry
in a shorter time if you leave the
door of your machine ajar during
this period.
This will increase
the drying effectiveness of your
machine.
Program Selection
You can select the desired program
after turning on the machine by
pressing the On/Off button. To do this:
Press selection buttons (
> - < ) ( 7 ) to
select the desired program. If you do
not want to add auxiliary functions to
the program, press Start/Pause/Cancel
Button to start the selected washing
program.
Once the program starts to run, Time
Indicator will display the estimated
remaining time to the end of the
program.
WARNING:
Your machine performs water softening
depending on the hardness level of
the supply water. Remaining time
displayed towards the end in some
programs can be different from the
time indicated at the beginning due to
this process. The total time can also
change while the program is running
depending on the ambient temperature
where your machine is installed,
temperature of the supply water and
amount of the dishes.
Adding Auxiliary Functions to
the Program
You can change the washing program
as you prefer by adding auxiliary
functions to it.
Washing programs of your dishwasher
are designed to obtain the best
cleaning, considering the type of the
soil, soiling degree and properties of