![background image](http://html.mh-extra.com/html/blomberg/gsn-1380/gsn-1380_operation-instruction-manual_2773928004.webp)
Before installation
Check the machine for transport damages. Never install
and use damaged machines. If in doubt, contact your
supplier.
Before first use
See Notes for Installation on page 22.
Have the grounding system installed by a qualified
electrician.
The manufacturer cannot be hold liable for any
damages that are due to operating the machine without
proper grounding.
Before operating the system, please check that the
data given on the type plate are in accordance with
the data of your power supply.
The dishwasher must be separated from the mains
during installation.
3
Recycling
The packaging and some parts of your machine are made
from recyclable materials. These materials are marked
up with recycling symbol and material type information
(PE, PS, POM).
Remove the packaging material and dispose of it in
accordance with regulations prior to taking the machine
into operation.
Warning
Packaging materials may be dangerous to children.
Reusable substances may be dropped off at the local
disposal facilities. You may obtain further information
from the authorities and disposal facilities.
Disposal of your old machine
Dispose of your old machine in accordance with the
disposal guidelines which are in effect at the location
where you reside. To avoid dangers, please make the
machine unusable until the time of transport.
Pull out the mains plug and cut the power cable.
Render the door lock unusable.
24
Water drainage
Connecting the drainage hose.
Take care to ensure that the water intake hose is not bent
or squeezed.
Check that the drainage hose is firmly seated in place.
Extension hoses
If a hose extension is required, a drainage hose of equal
quality must be used
The maximum length must not exceed 4m. Otherwise,
the machines cleaning process is negatively influenced.
Siphon connection
The drainage height must be between 50 and 100 cm
above the floor.
Use hose clamps to fasten the drainage hose to the
siphon.
Electrical connection
Please refer to the type plate for information on current
type, mains voltage, and fuse protection.
The type plate is located on the inside of the door.
The mains plug must be freely accessible after installation.
Power cables and insulated cables must not be accessible
after installation.
A (depends on the model)
The A- system protects you from water damage
which may be caused at the water inlet hose.
Do not immerse the systems valve box into water; it
contains electrical components.
In case of damage, pull out the power supply plug.
Do not shorten or lengthen the hose insert, since it
contains electrical cables and components.
3/4
min 10
A
18
21
01
0
20
30
40
50
60
70
80
90
100
11
0
12cm
min 4cm
max 110 cm
min 50 cm
Disposal
1
Safety Instructions
2