EN
13
16.
Re-fit the upper hinge on the
opposite side by using a flat headed
screwdriver. (15)
17.
Fit front top panel plastic hinge
covers on the opposite sides. (16)
18.
Remove the handle cover
gently taking care not to damage the
appliance.(17)
19.
Rotate 180 degrees and fit
handle to the other side after removing
hole plugs gently.(19)
20.
Adjust the two front feet if
necessary.
21.
Check that door opens and
closes easily, it is aligned correctly and
there are no gaps allowing air into the
cabinet. If here are gaps between the
door seal and the cabinet, adjust the
door seal by gently pulling away from
the door using fingers.
22.
Check that all the hinge screws
are tightened. Avoid over tightening
the screws.
23.
Put all items, fittings back in the
appliance.
24.
Wait for at least 4 hours to allow
the system to settle before switching
on.
25.
Once the correct storage
temperatures have been reached in
the appliance, put back all the food.
