background image

2

USA

immediately if detergent has been 

swallowed or inhaled.

 

if the hot water has not been used 

in several weeks, we recommend 

running the hot water taps to 

remove any built up hadrogen 

gases. 

 

Do not store or use flammable 

liquids or vapors in the area of the 

dishwasher.

 

When loading items to be washed, 

position sharp items so that they 

are not likely to damage the door  

seal and load sharp knives with 

the handles up to reduce the risk 

of cut-type injuries.

 

Do not wash plastic items unless 

they are marked “dishwasher 

safe” or the equivalent. For plastic 

items not so marked, check the 

manufacturer’s recommendations.

 

If a malfunction occurs, switch 

off the appliance and turn off the 

water supply to the dishwasher.

 

Please do not attempt to carry the 

dishwasher by yourself in order 

to avoid potential injuries. Two or 

more people are needed to move 

a dishwasher.

 

Before cleaning or carrying out 

maintenance, switch off the 

appliance, disconnect the power 

plug and turn off the water supply.

 

Repairs and technical 

modifications must be carried 

out exclusively by a Authorized 

technician.

 

If the dishwasher is not in 

use for an extended period of 

time (i.e. vacation home), we 

recommend remove all items 

from the dishwasher, leave the 

door cracked open to allow air 

to circulate and turn off both the 

power and water supply to the 

dishwasher.

 

This appliance comes with a 

three prong NEMA 5-15P 15A 

power cord. It must be connected 

to a Grounded and Polarized 

wall receptacle that has been 

installed and tested by an licensed 

electrician and that it has been 

installed based on all Local, State 

and Federal Electrical codes.

A

WARNING:

Improper 

connection of the equipment-

grounding conductor can 

result in a risk of electric 

shock. Check with a qualified 

electrician or service 

representative if you are in 

doubt whether the appliance 

is properly grounded. Do not 

modify the plug provided with 

the appliance, if it will not 

fit the outlet, have a proper 

outlet installed by a qualified 

electrician.

 

This appliance produces ozone 

within the washing compartment 

during normal operation. Long-

term exposure to ozone or 

exposure at elevated levels may 

result in respiratory problems, 

especially for the infirmed, elderly 

and children.

 

Chidren should not operate this 

machine without adult supervision.

 

Be Careful to not leave the door 

fully open when not being loaded 

or unloaded to prevent someone 

from tripping on the unit.

A

WARNING:

If your 

dishwasher is equipped with 

internal illumination, lamp 

should only be replaced by 

the Authorized Service Agent 

in case of failures that may 

occur on the lamp.

Summary of Contents for DWT 81800 FBI
















































Reviews: