36
USA
11. TROUBLESHOOTING
Machine does not start.
•
Power cable is unplugged. >>> Check if the power cable is plugged in.
•
Fuse is blown. >>> Check the fuses in your house.
•
Water is cut. >>> Make sure that the water inlet tap is open.
•
Door of the machine is open. >>> Make sure that you have closed the door of
the machine.
•
On / Off button is not pressed. >>> Make sure that you have turned on the
machine by pressing the On / Off button.
Dishes are not washed clean
•
Dishes are not placed orderly in the machine. >>> Load the dishes as
described in the user manual.
•
Selected programme is unsuitable. >>> Select a programme with a higher
temperature and cycle time.
•
Impellers are stuck. >>> Prior to starting the programme, turn the lower and
upper impellers by hand to make sure that they rotate freely.
•
Impeller holes are clogged. >>> Lower and upper impeller holes might be
clogged with food remnants such as lemon pips. Clean the impellers regularly
as illustrated in section “Cleaning and Care”.
•
Filters are clogged. >>> Check if the filter system is clean. Clean the filter
system regularly as illustrated in section “Cleaning and Care”.
•
Filters are installed incorrectly. >>> Check the filter system and make sure
that it is installed correctly.
•
Baskets are overloaded. >>> Do not overload the baskets in excess of their
capacity.
•
Detergent is stored under unsuitable conditions. >>> If you are using powder
detergent, do not store the detergent package in humid places. Keep it in a
closed container if possible. For ease-of-storing, we recommend you to use
tablet detergents.
•
Detergent is not sufficient. >>> If you are using powder detergent, adjust
the amount of detergent according to the soiling degree of your dishes and/
or programme definitions. We recommend you to use tablet detergents for
optimum results.
•
Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
•
Detergent dispenser lid is left open. >>> Make sure that the detergent
dispenser lid is closed tightly after adding detergent.
Dishes are not dry at the end of cycle
•
Dishes are not placed orderly in the machine. >>> Place your dishes in a way
that no water will accumulate in them.
•
Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse
aid if necessary. Increase the rinse aid setting if there is enough amount of
rinse aid in the machine.
•
Machine is unloaded right after the programme is over. >>> Do not unload
your machine right after washing process is completed. Slightly open the