2
USA
Dishwasher must be secured to adjacent
•
cabinetry using the brackets provided.
Failure to do this may cause damage to
property or bodily injury.
Connect to a properly rated, protected
•
and sized power supply circuit to avoid
electrical overload. The dishwasher is
designed for an electrical supply of 120 V
(volts), 60 Hz (hertz), AC, connected to a
dishwasher-dedicated, properly grounded
electrical circuit with a fuse or breakers
rated for 15 amperes. Electrical supply
conductors shall be a minimum of # 16
AWG copper wire rated at 75 °C (167
°F) or higher. These requirements must
be met to prevent injury and machine
damage. Consult a qualified electrician if
in doubt.
Do not use any extension cord or
•
portable outlet device to connect the
dishwasher to a power supply.
Ensure that any plastic wrappings, bags,
•
small pieces etc. are disposed of safely
and kept out of the reach of children.
Danger of suffocation!
Remove the door to the washing
•
compartment when removing an old
dishwasher from service or discarding it.
Ensure that the appliance presents no
danger to children while being stored for
disposal.
Old appliances may contain materials
•
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Notice :
The dishwasher drain hose must be
•
installed with a drain loop at least 28”
(710mm) off the cabinet floor; otherwise
the dishwasher may not drain properly.
This dishwasher is intended for
•
residential use only, and should not be
used in commercial establishments.
New installation - If the dishwasher is a
•
new installation, most of the work must
be done before the dishwasher is moved
into place.
Replacement - If the dishwasher is
•
replacing another dishwasher, check
the existing dishwasher connections for
compatibility with the new dishwasher,
and replace parts as necessary.
1.1 INSPECT THE DISHWASHER
After unpacking the dishwasher and prior
to installation, thoroughly inspect the
dishwasher for possible freight or cosmetic
damage. Report any damage immediately.
Notice :
Cosmetic defects must be reported within
•
10 days of installation.
Do not discard any bags or items that
•
come with the original package until
after the entire installation has been
completed.
1.2 HOW TO CONTACT US :
You may either call our Toll Free Number at
1-800-459-9848
or contact us via the web
site at
www.blombergappliances.com
or Contact the Blomberg Distributor for
your State or Province as listed on the
Distributor Contact List provided.
Summary of Contents for DW 24100 B
Page 25: ...17 9066 01 00 AC USA...
