9 - EN
8. Attach the power cord Ground conductor
THE CENTER WIRE TO THE TERMINAL LABELED
N.
Connect the terminal labeled
N
and the
Ground terminal labeled
G
with the supplied
short cable. Tighten the terminals so that they
securely hold the conductors.
9. Attach the two remaining power cord
outer conductors to the 2 terminals labeled
L
. Tighten both screws so that the power
conductors are securely held in place.
10. Tighten the strain relief so that the power
cord cannot be moved.
2EPLACE THE COVER ON THE JUNCTION BOX AND
fasten in place.
The dryer is now ready to be plugged into the
3-wire receptacle of the proper rating.
The receptacle should be located so that the
plug and receptacle will be accessible with the
dryer in its installed position.
Grounding Instructions
This appliance must be grounded. In the event
of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing
a path of least resistance for electric current.
This appliance is equipped with a cord having
an equipment-grounding conductor and a
grounding plug. The plug must be plugged
into an appropriate outlet that is properly
installed and grounded in accordance with all
local codes and ordinances.
o
0OWER CORD PLUG MUST BE WITHIN EASY
reach after installation.
o
4HE VOLTAGE AND THE ALLOWED FUSEBREAKER
protection are specified in the section
m4ECHNICAL 3PECIFICATIONSn
o
4HE STATED VOLTAGE MUST MATCH YOUR
mains voltage.
o
#ONNECTION VIA EXTENSION CORDS OR MULTI
plugs should not be made.
o
4HE MAIN FUSEBREAKER AND SWITCHES MUST
have a contact distance of minimum 3
mm.
B
A damaged power cable must be
replaced by a qualified electrician.
A
WARNING – Improper connection of
the equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or service
representative or personnel if you are
in doubt as to whether the appliance is
properly grounded. Do not modify the
plug provided with the appliance: if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
B
The appliance must not be operated
UNLESS IT IS REPAIRED 4HERE IS THE RISK OF
ELECTRIC SHOCK
Appropriate installation
location
o
)NSTALL YOUR
appliance
in environments that
have no risk of freezing and in a stable
and level position.
o
$O NOT PLACE YOUR APPLIANCE ON A LONG PILE
rug or on similar surfaces.
o
/PERATE YOUR APPLIANCE IN A WELL
ventilated, dust-free environment.
o
$O NOT BLOCK THE AIR DUCTS IN FRONT OF AND
under the machine.
B
Make sure that your appliance is not
placed on the power cable.
A
+EEP AT LEAST n CM FROM THE
edges of other furniture.