Blomberg DHP 24400W, Owner'S Manual & Installation Instructions, Page: 11 / 28

11 / 28 EN
Dryer / User Manual
9. Attach the two remaining power cord outer
conductors to the 2 terminals labeled L. Tighten
both screws so that the power conductors are
securely held in place.
10. Tighten the strain relief so that the power cord
cannot be moved.
11. Replace the cover on the junction box and fasten in
place.
The dryer is now ready to be plugged into the 3-wire
receptacle of the proper rating.
The receptacle should be located so that the plug
and receptacle will be accessible with the dryer in its
installed position.
3.2 Grounding Instructions
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least
resistance for electric current. This appliance is
equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local
codes and ordinances.
• Power cord plug must be within easy reach after
installation.
• The voltage and the allowed fuse/breaker
protection are specified in the section “Technical
Specifications”.
• The stated voltage must match your mains voltage.
• Connection via extension cords or multi-plugs
should not be made.
• The main fuse/breaker and switches must have a
contact distance of minimum 3 mm.
B
A damaged power cable must be
replaced by a qualified electrician.
A
WARNING – Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. Check
with a qualified electrician or service
representative or personnel if you are
in doubt as to whether the appliance is
properly grounded. Do not modify the
plug provided with the appliance: if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
B
The appliance must not be operated
unless it is repaired! There is the risk of
electric shock!
3.3 Appropriate installation location
•Install your appliance in environments that have no risk
of freezing and in a stable and level position.
•Do not place your appliance on a long pile rug or on
similar surfaces.
•Operate your appliance in a well-ventilated, dust-free
environment.
•Do not block the air ducts in front of and under the
machine.
B
Make sure that your appliance is not
placed on the power cable.
A
Keep at least 0.6” (1.5 cm) from the
edges of other furniture.