Operation
9
Solid State Digital Control
OVEN CONTROLS
1. POWER ON/OFF - controls the operation of
the oven. When lit the power to the unit is on.
If the switch is not lit, the power to the unit is
off.
2. DISPLAY --- displays time, temperature and
other information related to oven function.
Time is displayed in minutes and seconds and
counts down.
3. START/STOP KEY --- starts or stops the se-
lected product key program.
4. PRODUCT KEYS (1-6) --- associates a time
and temperature with a specific product for
each key.
5. PROGRAM KEY --- accesses the program
mode to set or change the time or temperature
of a product key.
6. HEAT LIGHT --- indicates that the elements are
operating.
DISPLAY MESSAGES
Indicates the oven is heating to, or cycling
at the idle temperature. (Temperature the
oven maintains when not in use).
Indicates the oven temperature is too high
for the selected product recipe. Wait until
is displayed.
Indicates the oven temperature is too low
for the selected product recipe. Wait until
is displayed.
Indicates the oven has reached the se-
lected recipe temperature. Ready for prod-
uct load.
Indicates the number of pans of the same
product in one load.
Indicates the timer has counted down to
00:00 and the product is done.
Indicates the control is ready to accept the
code and enter the program mode.
Indicates the control has entered the pro-
gram mode.
Indicates the cook temperature for a prod-
uct key can be programmed.
Indicates the cook time for a single pan can
be programmed.
Indicates the cook time for two pans can be
programmed.
Indicates the cook time for three pans can
be programmed.
Indicates an open or shorted probe.
1
2
3
5
4
6
Figure 5