19
VOLUME CONTROL SETUP Menu
Move the cursor to the desired position, select and then adjust value/option according the table below.
SETUP Menu
STANDBY
BATTERY
POWER AMP…
SETTINGS >
CANCEL
SETTINGS
CLASS
BALANCE
PHASE
AUTO STANDBY
ADVANCED >
ADVANCED
INPUTS >
DISPLAY >
VOLUME >
PAIR REMOTE
FACTORY RESET
VOLUME Menu
OPTIONS
DEFAULT
TURN ON
LAST, 03 to 20
LAST
MAXIMUM
20 to 50
50
MUTE
00 to 05
00
PHONES OUTPUT
OPTIONS
DEFAULT
MAXIMUM
20 to 50
50
VOL. OFFSET
-15 dB to +15 dB
0 dB
TURN ON: This setting lets you set a line output volume level to which your Line Block will default every time
you turn it on. While LAST option chosen, the volume level setting from the previous time the unit was powered
down is retained.
CAUTION: Setting the TURN ON parameter to LAST can result in louder-than-expected power-up volume if the Line Block
was set to a high volume level setting when last powered down.
MAXIMUM: This setting lets you set a maximum line output volume level.
MUTE: This option lets you set the line output volume level that occurs when the PLAY/PAUSE button on the
Block Remote is engaged.
PHONES OUTPUT
MAXIMUM: This setting lets you set a maximum phones output volume level.
VOL. OFFSET: This option allows you to match the volume of your headphones with the speaker volume in the
system.
Summary of Contents for LINE BLOCK
Page 5: ...5 ...
