16
17
Operating elements on the tabletop
1. Power: On/Off
2. Play/Pause
3. Volume -
4.
5. Equalizer: Pop, Rock, Movie
6. Wireless charger symbol
ASSemble steps
Place the speaker on a flat surface with base (showing the screw holes) upwards, insert every leg into a screw hole
like in the picture above. Turn the speaker right side up after the wooden legs are assembled. Afterwards remove the
sticker from the side of the table. Connect the AC adapter with the speakers DC socket.
(See connections)
EQ
1
2
3
4
5
6
1
2
3
Bitte lösen Sie den Aufkleber erst nach der
installation der Beine ab!
Do not tear out the tape befor install the legs.
4
Connections
1. USB Connections 5V 2.4A
2. DC IN (power socket)
3. AUX IN
TWS Function
You are able to connect two tables.
1.
Turn on the first and second speaker by pressing Power.
2.
Double click on one of two speakers, the speakers will enter team paring mode, you will hear an acoustic signal.
3.
The orange LED of main speaker will always light, the LED of sub-speaker will slowly sparkle.
4.
When speakers are team pairedinsert the AUX cable into the AUX socket on the back panel of the main speaker.
5.
The speakers will switch off the team paring by pressing Power shortly.
6.
While the speakers are set into TWS mode, the EQ function of both speakers can be adjusted by pressing one of their EQ
button.
EQ
1
2
3
USB Charging & Wireless charging
You are able to charge your mobile device wireless or by USB.
1.
Therefore connect your mobile phone with USB connection.
2.
If you have a smart phone with wireless charging, you can charge it by placing it onto the inductive symbole for
wireless charging.
