background image

SAFETY  INSTRUCTIONS

Safety Instructions

CAUTION: To reduce the risk of electric shock, do not remove any 
cover. 
N O  U S E R - S E R V I C E A B L E  PA R T S  I N S I D E ,  R E F E R  A N Y 
SERVICING TO QUALIFIED SERVICE PERSONNEL.

IMPORTANT SAFETY INSTRUCTIONS
* Read and keep these instructions available for future reference.
* For indoor use only.
* The unit must only be connected to a suitable mains power supply 
using the mains power lead provided.
*  To  reduce  the  risk  of  fire  or  electrical  shock,  do  not  expose  this 
unit to rain or moisture.
* The apparatus shall not be exposed to dripping or splashing.
*  No  objects  filled  with  liquids,  such  as  vases,  shall  be  placed  on 
the apparatus.
*  Unplug  the  unit  from  the  wall  socket  during  lightning  storms  and 
when it is not going to be used for a long period of time.
*  Take  care  that  foreign  objects  do  not  enter,  or  liquids  are  not 
spilled,  into  the  enclosure  through  any  openings.  If  this  should 
happen,  refer  to  qualified  service  personnel  before  attempting  to 
use.
* Ensure adequate ventilation - do not cover this unit with curtains, 
etc.
*  Do  not  install  near  any  heat  source,  such  as  radiators,  or  other 
equipment that produces heat.
* Protect the mains power cable from being damaged.

The lightning flash symbol with the arrowhead within an equilateral 

triangle is intended to alert the user to the presence of uninsulated  

'dangerous  voltage'  within  the  product's  enclosure  that  may  be 

sufficient to constitute a risk of electric shock to persons.

The  exclamation  point  within  an  equilateral  triangle  is  intended  to 

alert the user to important operating and maintenance  instructions 

in the service literature relevant to this appliance.

"Information for the consumer"
Disposal of your old product
Your product is designed and manufactured with high quality materials and components,
which can be recycled and reused.
When this crossed out wheeled bin symbol is attached to a product it means the product is 
covered by the European Directive 2002/96/EC.
Please make yourself aware of the local collection system for electrical and
electronic products.
Please act according to your loca rules and do not dispose of your old products with 
your normal household waste. The correct disposal of your old product will help prevent
potential negative consequences for the environment and human health.

 

This product complies with European low votage (73/23/EEC)
and electromagnetic compatibility (89/336/EEC) directives.

A symbol for class II ( double insulation)

P12

Summary of Contents for A 100























Reviews: