9
BLOCK REMOTE
Functions
UP/DOWN: Press these buttons to adjust the volume level. Use also to move the cursor, or to change values in
the Settings.
LEFT/RIGHT: Press these buttons to select the desired input. Use also to move the cursor, or to change values
in the Settings.
SELECT: This button can be used to put the Line Block, or system into and out of the Standby mode. Use also to
select/enter menu item in the Settings.
MENU: Press this button to display and escape the Setup Menu.
PLAY/PAUSE: This button allows you to mute and unmute the audio signal.
Pairing / Unpairing
Open Setup Menu, choose SETTINGS > ADVANCED > PAIR REMOTE: Instructions for the Pair / Unpair of the
Block Remote with the Line Block will be displayed.
Battery Replacement
•
Find the battery component on the back of your Remote.
•
Use a coin to turn the battery door counterclockwise until the door opens.
•
Remove the old battery.
•
With the positive side facing up toward you, put in the new CR2032 or BR2032 lithium 3V coin battery
(available at most electronic and drug stores).
Summary of Contents for Line & Power Block
Page 5: ...5 ...