26
27
The USB-Port
You can connect a removable storage device (eg. USB stick) to the USB port of your Block B. This storage medi-
um must be formatted FAT 32 in order to be read from Block B. This may possibly be limited in size, it depends
on the manufacturer of the storage medium. The Block B recognizes MP3, WMA and FLAC files with a maximum
sampling rate of 48 kHz. The bit rate is not limited here. You can use the USB media player both with the optional
remote and with the device itself, but it is recommended to use the „UNDOK ™“ app.
If you have defined Block B as the basic device in the „UNDOK ™“ app, the contents of the USB stick can also be
played back on other devices in your multi-room system
the Internetradio
If you have connected your Block B to the Internet as it is described in the instructions for the UNDOK ™ app,
you are now able to receive Internet radio without any further settings. Your Internet radio connects fully
automatically to one of the largest databases for Internet broadcasters, in which more than 25,000 stations
worldwide are listed. Using the app „UNDOK ™“ you can save your favourite channels as favourites and recall
them at anytime.
Connecting external devices using Bluetooth
®
Your Block B is equipped with a modern Bluetooth® interface. These can be used to couple any signal source
that complies with the Bluetooth® standard to Block B. So you can use it to pair any signal source that complies
to with Bluetooth® standard Block B. Possible signal sources are smartphones (iOS, Android, Windows Phone),
tablet PCs (iOS, Android, Windows 8) or media player (iPod, similar) with Bluetooth® function.
To activate the Bluetooth® function, press the button on the optional remote control „BT“, or select the source
„Bluetooth“ in the app „UNDOK ™“. Activate the Bluetooth® function on your external device. Please note that
the Block B is only suitable for receiving audio data, not for sending. To put the Block B in „Paring Mode“, press
the „BT PAIR“ button.
The AUX connection
The rear AUX connector on the Block B processes electrical high-level audio signals in analogous form. This
connector is suitable for all external devices with analogue audio output. Please consult the operating instruc-
tions of the external device for connection. A suitable cinch cable is available in the accessories stores.
Pair an external device with the Block B:
Using your external device, search for Bluetooth enabled devices in your area, select your Block B, and start
pairing (pairing devices). In case of problems or for further pairing instructions, please refer to the operating ins-
tructions of the device you would like to pair with your Block B. You can then activate the music playing function
of your external device and your Block B will play the music.
Playing audio files:
1. Press the „Play“ button on the optional remote control to play a song .
2. Press the “Pause” button on the optional remote control to pause a song.
3. Press the „Forward“ button on the optional remote to skip to the next track
4. Press the „Back“ button on the optional remote control to skip to the previous track. Alternatively, you can
control music playback directly from your external device or the UNDOK ™ app.
How to use SPOTIFY Connect
To use Connect, you will need Spotify Premium. Details can be found on the enclosed flyer.
1. Connect your new device to the same Wi-Fi network that your phone, tablet or PC is connected to.Open
the Spotify app on your phone, tablet or PC and play a song. If you use the app on your phone, tap the
image of the song at the
2. bottom of the screen. Tablet and PC users please go to step 4.
3. Touch the Connect icon
4. Select your device from the list. If it is not displayed, you make sure it‘s connected to the same
Wi-Fi network as your phone, tablet, or PC.
The Spotify product is subject to a third party license terms: www.spotify.com/connect/third-party-license
Spotify is the registered trademark of the Spotify Group.