x12
x16
30
Nm
DRILL HOLE
VACUUM
90MM
3
TIGHTEN ALL BOLT ASSEMBLIES WITHIN THE CIRCLE TO THE SPECIFIED TORQUE . ENSURE
UPRIGHTS ARE PLUMB. DRILL AND SECURE UPRIGHTS AND 1.2 `SINGLE BAR WM (21-0126-0B) AS
SHOWN IN GUIDE.
10.0031
10.0019
10.0031
10.0019
HAMMER IN
BOLT
TIGHTEN
-DRILL 10MM HOLE, 90MM DEEP
USING PLATE AS A GUIDE.
-VACUUM OUT THE DUST.
-HAMMER SLEEVE ANCHOR INTO
THE HOLE.
-TIGHTEN SLEEVE ANCHOR TO
SPECIFIED TORQUE
USING 13MM SPANNER.
SLEEVE ANCHOR BOLT FITTING
#MADEINBELFAST
30
Nm
x20
