WARNING
SPIRIT LEVEL
10MM MASONRY
DRILL BIT
TOOLS REQUIRED
17MM SPANNER X2
13MM SPANNER
HAMMER
HAMMER DRILL
VACUUM
STEP LADDER
PARTS & ATTACHMENTS
No.
Name
SKU
QTY
1
2.4 UPRIGHT DNA60
WITH FEET
21-0036-0A
2
2
0.7 SINGLE BAR WM
DNA60
21-0032-0B
2
3
1.2 SINGLE BAR CM
DNA60
21-0015-0A
1
4
J-HOOKS PAIR
16-0001
1
5
M10X80 SLEEVE
ANCHOR
10-0031
6
6
M10X90 BOLT
10-0008
10
7
M10 NYLOCK NUT
10-0024
16
8
M10 FLAT WASHER
10-0019
10
SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE
BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF
INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE EQUIPMENT (PPE).
WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY OF THIS PRODUCT.
EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS AND EAR PLUGS.
PLEASE BE AWARE OF THIS SYMBOL AS AN INDICATION TO CHECK THAT A PART IS LEVEL
OR PLUMB.
THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH
BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON
THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL.
#MADEINBELFAST
1
2
3
4
5
6
8
7
xx
Nm