STARTUP
•
Plug in the cabinet; operate the chiller/freezer for three hours. This will
aid in refrigerator performance.
•
The electronic thermostat can be adjusted by pressing the
SET
key more
than 3 seconds, the display will flash. Select the desired target
temperature by pressing the
SET
key, the temperature (in centigrade)
may be adjusted
0 to +8
for the chiller,
-16 to -24
for the freezer.
MAINTENANCE
Cleaning
•
Before cleaning the appliance always remember to unplug it, never unplug
your freezer by pulling on the power cord. Always grasp the plug firmly
and pull straight out from the power outlet.
•
Do not use sharp or pointed objects for cleaning
•
Clean the inside of the chiller/freezer with a damp cloth or with a neutral
cleanser. Avoid damage by never using abrasive or flammable cleaning
products. Clean the condenser at least once a month with a vacuum
cleaner and a brush to eliminate dust accumulation.
Power Failure
•
Please minimise the frequency of door opening during a power failure.
Generally power failures are corrected within a few hours and the
temperature of your chiller/freezer will not be affected. If the power will
be off for an extended period, proper procedure should be followed with
regard to the storage cans.
•
Non usage for extended period of time: If your chiller/freezer is unused for
an extended period, it is best to remove the cans, unplug and clean the
chiller/freezer. Also please leave the door open to avoid possible
formation of condensation, mould or odours.
Spare Parts
For spare or replacement parts, please scan the QR code below with your
smartphone or reader. Alternatively, visit
www.pentlandparts.co.uk
