CONTROL PANEL
The control panel comprises of the following elements:
•
Green mains supply light. This must always be on
•
Thermometer which shows the temperature inside the freezer
•
Thermostat knob to adjust the temperature in the freezer. To
decrease the temperature, turn the knob clockwise
•
Freezers with an internal fan motor are equipped with a door
switch which cuts out the fan motor by opening the door
(standard for glass door model)
•
Internal light will be equipped with an On/Off switch to turn
off the light during the night (Normally standard for glass door
model)
OPERATING
The
FZ40
can be used to freeze down fresh food as well as to store
frozen food, whereas the
GFZ40
is a conservator which may only
be used for storing frozen food.
•
Before use, the interior of the freezer should be cleaned by
using a solution of 1 tsp Sodium Bicarbonate to 0.5ltr water.
Do not clean the glass door with abrasive cleaning agents or
materials!
•
If the freezer has been exposed to very low ambient
temperatures, do not switch on the freezer until the
compressor temperature is estimated to be at least
+10˚C
•
Always ensure that the contents do not impede the free air
circulation (for the fan assisted
GFZ40
) as this may lead to
excessive differences between the upper and lower parts of
the freezer
•
You are advised to adjust the thermostat according to the
ambient conditions of your freezer. (25˚C approx-Thermostat
pos. 4 and 30˚C approx-Thermostat pos. 5
•
We always recommend that you always pack fresh food as
well as frozen in air tight plastic/plastic bags
•
Fresh food should always be placed so that it has contact with
the freezing shelves
•
If the freezing shelves are equipped with a wire cover, it can
be opened by lifting it and pulling towards you.
