Reversing The Door
How to Reverse The Door
•
Remove the lower hinge by loosening and removing the screws with a screw
driver
•
Carefully lower the door and remove it
•
Move the pivot pin to the opposite hole on the lower hinge
•
Move the pivot pin from the top left hinge to the opposite hole on the top right
hinge
•
Remove the two screws from the right holes in the bottom cross bar
•
Take the door, insert the lower hinge axle into the bottom right hole of the door,
take the top right hole in the door into the right hand hinge axle
•
Adjust the door, make it straight and aligned with the cabinet
•
Fix the lower hinge with 2 screws
•
Cover the left holes in the bottom cross bar with 2 screws
Notes:
As the door gasket gets pressed in during shipping, after reversing the door,
the gasket may have to be reset. This will be good for the seal to avoid any air
escaping. If there is a gap between the door gasket and the cabinet, set the gasket by
gently pulling it out to seal the gap. It is recommended to use a warm hair drier to
warm the gasket and get rid of the gap.
