PENTLAND WHOLESALE LTD. www.pentlandwholesale.co.uk
+44 01254 614444
cord. Direct wash by water is not permitted in case of any damage of the functions.
If do not use it at any time, please turn off temperature controller and main switch.
Please store the equipment in a ventilated storehouse without corrosive gas after cleaning when ceasing its work for
a long time.
Troubleshooting
Troubles
Causes
Solutions
1. Module plates are out of
heating when the power and
heating indicator are both on.
1.
Temperature controller is
broken.
2.
At least one of heating
wires is burned.
3.
Temperature
protector
works.
1.
Change
temperature
controller.
2.
Change the burned heating
tube.
3.
Dismantle the bottom plate
and
use
hand
to
reset
temperature protector.
2. When the power is on and
temperature controller is switched
and heating indicator is on and
temperature can be not controlled.
1. Temperature controller is
out of order.
1. Change temperature controller.
3. Indicator is not on when the
power is on and the heating
process is normal.
1. Indicator is broken.
1. Change temperature controller.
The indicator is out of order when
the power is on.
1.
Abnormal power supply
or cut-off power supply.
2.
Fuse is burned.
1.
Check
power
supply
and
connection to make power
supply be normal.
2.
Change fuse.
Aforementioned troubles are just for reference. If any fault occurs, please cease using and turn to
professional technicians for check and repair.
Circuit Diagram
220V~240V,50HZ
BRRCG1 BRSCG1
