Blizzard Lighting The Puck RGB Unplugged Manual Download Page 4

Page 4

             The Puck: Unplugged RGB Manual Rev. A 

 

Copyright (c) 2011 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

 

• 1 x Puck: UNPLUGGED™ RGB Flat LED PAR Fixture

 

• 1x IEC Power Cord

 

• This Lovely User Manual

Getting It Out Of The Box

Congratulations on purchasing one way cool, way THIN LED PAR fi x-

ture!  Now that you’ve got The Puck: UNPLUGGED™ RGB (or hopefully, 

Pucks!), you should carefully unpack the box and check the contents 

to ensure that all parts are present and in good condition. If anything 

looks as if it has been damaged in transit, notify the shipper immedi-

ately and keep the packing material for inspection.  Again, please save 

the carton and all packing materials. If a fi xture must be returned to 

the factory, it is important that the fi xture be returned in the original 
factory box and packing.

Powering Up!

All fi xtures must be powered directly off a switched circuit and cannot 

be run off a rheostat (variable resistor) or dimmer circuit, even 

if the rheostat or dimmer channel is used solely for a 0% to 

100% switch.  

AC Voltage Switch - Not all fi xtures have a voltage select switch, so 

please verify that the fi xture you receive is suitable for your local pow-

er supply.  See the label on the fi xture or refer to the fi xture’s specifi -

cations chart for more information.  A fi xture’s listed current rating is 

its average current draw under normal conditions. Check the fi xture or 

device carefully to make sure that if a voltage selection switch exists 

that it is set to the correct line voltage you will use.

Warning! Verify that the voltage select switch on your unit 

matches the line voltage applied. Damage to your fi xture may 

result if the line voltage applied does not match the voltage 

indicated on the voltage selector switch. All fi xtures must be 
connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call or send an email.  

We’ll be happy to help, honest.
Blizzard Lighting

W220 N1531 Jericho Ct. Suite E., Waukesha, WI 53186 USA

[email protected]

www.blizzardlighting.com

866.493.6025

Summary of Contents for The Puck RGB Unplugged

















Reviews: