Page 13
StormChaser Manual Rev. C
Copyright (c) 2012 Blizzard Lighting, LLC
DMX Values In-Depth (7/10/31 Channel Mode)
Channel Channel Value 7 Channel
10 Channel
31 Channel
1
000 <-> 010
011 <-> 042
043 <-> 084
085 <-> 127
128 <-> 191
192 <-> 255
Mode
No Function
7 Channel Mode
31 Channel Mode
10 Channel Mode
2 Channel Mode
Sound Active Mode
2
000 <-> 255
Dimmer (0 <-> 100%)
3
000
001 <-> 255
Strobe
No Function
Strobe (Slow <-> Fast)
4
000 <-> 255
Global Red Intensity
Pixel 1 Global Intensity
Pixel 1 Red Intensity
5
000 <-> 255
Global Green Intensity
Pixel 2 Global Intensity
Pixel 1 Green Intensity
6
000 <-> 255
Global Blue Intensity
Pixel 3 Global Intensity
Pixel 1 Blue Intensity
7
000 <-> 255
Global White Intensity
Pixel 4 Global Intensity
Pixel 1 White Intensity
8
000 <-> 255
N/A
Pixel 5 Global Intensity
Pixel 2 Red Intensity
9
000 <-> 255
N/A
Pixel 6 Global Intensity
Pixel 2 Green Intensity
10
000 <-> 255
N/A
Pixel 7 Global Intensity
Pixel 2 Blue Intensity
11
000 <-> 255
N/A
N/A
Pixel 2 White Intensity
...
...
...
...
...
28
000 <-> 255
N/A
N/A
Pixel 7 Red Intensity
29
000 <-> 255
N/A
N/A
Pixel 7 Green Intensity
30
000 <-> 255
N/A
N/A
Pixel 7 Blue Intensity
31
000 <-> 255
N/A
N/A
Pixel 7 White Intensity
Troubleshooting
Symptom
Solution
Beam is Dim
Check optical system and clean excess dust/grime. Also ensure that the
220V/110V switch is in the correct position, if applicable.
No Light Output
Check to ensure fixture is operating under correct mode, IE sound active/auto/
DMX/Etc., if applicable. Contact service for more information.
Chase Too Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power
Check fuse, AC cord and circuit for malfunction.
Blown Fuse
Check AC cord and circuit for damage, verify that moving parts are not re-
stricted and that unit’s ventilation is not obstructed
Slow Movement
Verify that 220V/110V switch is in the correct position, if applicable. Also check
that speed channels are set appropriately.
No Response to Audio
Verify that the fixture is in “Sound Active” mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not Responding /
Responding Erratically
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Reset fixture(s).
Fixture Moving On Its
Own
Verify proper mode of operation. Is the fixture in “Auto” mode?
If your problem isn’t listed, or if problems persist, please
contact support: [email protected].
