Page 13
Stiletto™ Z6 User Manual Rev. A
(c) 2015 Blizzard Lighting, LLC
Control Panel Menu Structure
Main Function
Sub Function
Selection
What It Does...
Function
1
Address
=000 <-> XXX
Sets the DMX address
CH Value
= XXX...
Displays all current DMX channel
values
Slave
= Slave
Sets the unit in slave mode.
Auto
= Alone
= Master
Sets the unit in auto mode
Music
= Alone
= Master
Sets the unit in sound active mode
Info
2
Temp Inf
Head Tem
= XXX
Displays the current internal tem-
perature
Soft Inf
= OFF / = ON
Displays the current software version
Person
3
Status
Pan Rev
= OFF / = ON
Reverses the pan movement
Tilt Rev
= OFF / = ON
Reverses the tilt movement
P-Degree
=360 <-> 540
Pan rotation (360° or 540°)
M Speed
Speed 1 / 2
Adjust Motor Speed (1=fast, 2=slow)
Mic Sens
= 0% / = 99%
Adjust the sound active mic sensitivity
Temp C/F
= F / = C
Display degrees as Fahrenheit or
Celsius
Default
= OFF / = ON
Resets personalized settings to default
Reset
4
Reset?
<ENTER>
Resets the fixture
Adjust
5
Password
=000 <-> 255
Password protected pan/tilt calibera-
tion settings. The password is:
050
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
DMX Starting Address
1.) To assign a DMX staring address to the fixture, use the
<UP/DOWN>
buttons to scroll to
Function,
and press the
<ENTER>
button.
Then use the
<UP/DOWN>
buttons to display
Address
, press
<ENTER>,
and use the
<UP/DOWN>
buttons to highlight any value desired
for the starting DMX address. Press the
<ENTER>
button to confirm your choice.
Slave Mode
1.) Disconnect fixture(s) from DMX signal source, and set all to matching DMX channel modes.
2.) For each fixture you want to run in slave mode, use the
<UP/DOWN>
buttons to navigate
to
Function
, and press
<ENTER>
. Then use the
<UP/DOWN>
buttons to navigate to
Slave
,
and press
<ENTER>
to confirm.
3.) Connect all fixtures together via DMX. The first fixture in the DMX chain will be the master
fixture, followed by the slave fixtures.
4.) Connect DMX controller to the master unit for DMX control.