Page 14
Snake Eyes™ Manual Rev. A
© 2016 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Select the Channel Mode
1.) Press
<MENU>
to enter EDIT interface.
2.) Use the
<UP/DOWN>
buttons to choose
Operate Mode
, press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to highlight
15 Channel
or
37 Channel
.
4.) Press the
<ENTER>
to confirm, or
<MENU>
to exit.
Select the Starting DMX Address
1.) Press
<MENU>
to enter EDIT interface.
2.) Use the
<UP/DOWN>
buttons to choose
DMX Address
, press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to choose a starting DMX address ranging from
001-512, press
<ENTER>
to confirm, or
<MENU>
to exit.
Master/Slave Mode Settings
1.) Connect fixtures together via DMX.
2.) Press
<MENU>
to enter EDIT interface.
3.) Use the
<UP/DOWN>
buttons to choose
Operate Mode
, press
<ENTER>
.
4.) Use the
<UP/DOWN>
buttons to choose
Mast Mode
, press
<ENTER>
.
5.) From here you can choose to set each fixture to act as either the master (first
in DMX chain), or a slave which will follow the master.
6.) Press
<ENTER>
to confirm your choice.
Auto and Sound Active Modes:
*Important:
To use Auto or Sound Active modes in
Standalone
, the settings in
DMX
Lost
must also be set to match:
Auto
or
Sound Active.
Press
<MENU>
, go to
<System
Settings>,
navigate to
<DMX Lost>,
select
<Auto>
or
<Sound>
and save. Then...
Auto Mode
1.) Press
<MENU>
to enter EDIT interface.
2.) Use the
<UP/DOWN>
buttons to choose
Operate Mode
, press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to choose
Auto Mode
, press
<ENTER>
.
4.) Use the
<UP/DOWN>
buttons to choose a built-in program, press
<ENTER>
.
Sound Active Mode
1.) Press
<MENU>
to enter EDIT interface.
2.) Use the
<UP/DOWN>
buttons to choose
Operate Mode
, press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to choose
Sound Control
, press
<ENTER>
.
4.) Use the
<UP/DOWN>
buttons to choose the microphone sensitivity level
ranging from 0% to 99%, press
<ENTER>
.
