Page 12
ROCKLITE TRI LED Manual Rev. A
Copyright (c) 2011 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the DMX Primer on page #15.
1.) The ROCKLITE TRI is capable of operating with either 3 or 7 DMX channels.
To use the fi xture in 3-channel mode, use the <MENU> button to select
d001
on the LED Readout.
2.) To operate the fi xture in 7-channel mode, use the <MENU> button to select
A001
on the LED Readout.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable
speeds.
1.) To set the fi xture in Flash/Fade mode, select
FF01-FF99
(Fade Mode,
slowest to fastest) or
CC01-CC99
To confi rm, press the <SAVE> button.
2.) To use the fi xture in demo mode, select
dEoo
, then press the <SAVE>
button to confi rm.
3.) Each fi xture is a master by default. To set the fi xture as a slave, use the
<MENU> button to reach
SLAv,
then press the <SAVE> button to confi rm.
Sound Acitve Mode:
1.) To use sound active mode, select either
SouD
.
2.) Press the <SAVE> button to confi rm.
Manual Mode (Color Preset Mode):
Allows a single unit to display a variety of colors without a DMX controller.
1.) Reach the manual adjustment by using the <MENU> button to reach
b001
.
Adjust each color by using the <SAVE>, <UP> and <DOWN> buttons to se-
lect
r001-r255
,
g001-g255
or
b001-b255
(Red, Green and Blue,
respectively), and adjusting between 1 (lowest) and 255 (highest) for each color.
To confi rm, press the <SAVE> button.