Page 11
ProPar COB RGBAW Manual - Rev. B
(c) 2019 Blizzard Lighting, LLC
Control Panel Menu Structure
Mode
Address
001-512
Choose the starting DMX address of 1-512
DMX Mode 2Ch
To run in 2-channel mode
3CH1
To run in 3-channel (1) mode
3Ch2
To run in 3-channel (2) mode
5Ch
To run in 5-channel mode
10Ch
To run in 10-channel mode
Static
Dimmer
Dimmer (0% <--> 100%)
Strobe
Flash / strobe speed (0-255)
Red
Red intensity (0% <--> 100%)
Green
Green intensity (0% <--> 100%)
Blue
Blue intensity (0% <--> 100%)
White
White intensity (0% <--> 100%)
Amber
Amber intensity (0% <--> 100%)
Macro
01-15
Built-n color macros
Jumping
Speed
Macro jump speed, slow to fast (000-255)
Strobe
Strobe, 0-20Hz (000-255)
Fading
Speed
Macro fade speed, slow to fast (000-255)
Strobe
Strobe, 0-20Hz (000-255)
Auto
<ENTER>
Auto Mode
Sound
Sens
Sound active mode + mic sensitivity adjustment (00-99)
Slave
<ENTER>
Slave mode
Settings
Display
On
Menu display continually on
Off
Menu display turns off after 30s of inactivity
DMX Fail
Hold
Hold last command upon loss of DMX signal
Blackout
Blackout upon loss of DMX signal
Dimmer
Curve
Linear
The light intensity increases linearly with the DMX value.
Exp
Adjustment of the light intensity is finer in the lower DMX value
range, and coarser in the upper DMX value range.
Log
Adjustment of the light intensity is coarser in the lower DMX value
range, and finer in the upper DMX value range.
S-Curve
Adjustment of the light intensity is finer in the lower and upper
DMX value ranges, and coaster in the middle DMX value range.
DimRespe
(dimmer
response)
LED
Dimming responds abruptly to the changes in the DMX value.
Halogen
Dimming behaves in a manner similar to that of a halogen lamp,
with gentle changes in brightness.
WhiteBal
Red
Cross-operating mode white balance setting: Red (0-255)
Green
Cross-operating mode white balance setting: Green (0-255)
Blue
Cross-operating mode white balance setting: Blue (0-255)
White
Cross-operating mode white balance setting: White (0-255)
FanSet
Regular
Normal fan operation
Silent
Silent mode (automatic reduced brightness may occur)
Test
On
Step-by-step function test of LEDs
Off
Stops the function test
Factory
Reset
On
Reset to factory settings
Off
Do not perform factory reset
System
Info
Firmware
<ENTER>
Display the device software version
Temp info
LED Temp
Display current LED board temperature
Temp Unit
Display temperature in Fahrenheit or Celsius
Time info
Power On
Displays the total operating time in hours
Last Run
Hrs
Displays the operating time since the last operation
