Blizzard Lighting LightCaster Manual Download Page 4

SPECIFICATIONS

Model: 

 

  LightCaster

Voltage:   

 

12VDC, 500ma

   100~240V, 

50/60Hz

Operating Band:   

2.4Ghz ISM

Max Operating Range: 

400 Meters (Line of Sight)

Max Transmission Power:  20dBm

Receiver Sensitivity: 

-94dBm

Data Input: 

 

3-Pin Locking XLR Male

Data Ouput: 

 

3-Pin Locking XLR Female

Protocol:  

 

USITT DMX-512

Dimensions:  

 

5.8”(L) x 2.95”(W) x 1.7”(H)

 

 

 

75mm x 147mm x 43mm

Weight:   

 

.8 Lbs. / .36 kgs.

Duty Cycle:  

 

None

Working Position:  

Any Safe, Secure Position

Warranty:    2 

Years

Specifi cations and improvements in the design of this unit and this manual 

are subject to change without any prior written notice.

POSSIBLE CONFIGURATIONS

The diagrams below show possible confi gurations. Multiple receiv-

ers may be used in any possible confi guration.

OPTION 1. A transmitter is connected to the output of the con-

troller, and a receiver is connected at the input of the fi rst DMX 

fi xture.

OPTION 2. A transmitter is connected to the output of a DMX 

fi xture, and a receiver is connected to the input of the next DMX 

fi xture. 

Summary of Contents for LightCaster

Page 1: ...ntained as set forth in the instruction manual This is not a service contract and this warranty does not include maintenance cleaning or periodic check up During the period specified above Blizzard Lighting LLC will replace defective parts at its expense with new or re furbished parts and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship...

Page 2: ...mpting to operate this unit These instruc tions contain important safety information regarding the use and maintenance of this unit Please keep this manual with the unit for future reference FEATURES Transmits DMX 512 wirelessly up to 400m Line of Sight Ultra stable 2 4ghz ISM operation Up to 16 systems may operate simultaneously Automatic or manual channel selection 4 User selectable transmission...

Page 3: ...n Transmitter or Receiver Mode While in Searching mode the unit will display the current frequency being scanned 3 Transmission Power Level Displays the current transmission power applicable for Transmitter Mode Only 0 2dBm Lowest 1 8dBm 2 14 dBm 3 20 dBm Highest To change the transmission power level use the PA button located on the front panel 4 Channel Group ID Displays the current channel grou...

Page 4: ...ing Position Any Safe Secure Position Warranty 2 Years Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice POSSIBLE CONFIGURATIONS The diagrams below show possible configurations Multiple receiv ers may be used in any possible configuration OPTION 1 A transmitter is connected to the output of the con troller and a receiv...

Reviews: