Blizzard Lighting Kontrol 5 Manual Download Page 13

Page: 13 / 20

KONTROL 5 Manual Rev A.

Page 13

2. Press the

<RUN MODE>

button until the LED indicator for MANUAL

mode is illuminated.

3. Using the

<LEFT/RIGhT>

buttons, move through the steps in the

selected chase.

3.5.4 Playback Override

Allows the user to manually override the current output while in Color/Scene

Preset or Chase Playback Mode.

1. Ensure that BLACKOUT mode is not selected, IE that the LED indica-

tor above the

<BLACKOUT>

button is not lit.

2. Using the

<FIXTURE SELECTOR>

button(s), select the fixtures to

be controlled.

3. Adjust the color output using

<FADER 1-5>

as desired.

4. To return to Color/Scene Preset or Chase Playback Mode, press

<DEL/CLEAR>

3.5.5.1 Strobe Setup

Allows the user to set the channel/channels which will be controlled by the

strobe function, for each fixture.

1. Enter programming mode as described in Section 3.2.1.

2. Press the

<STROBE>

button.

3. Using the

<FIXTURE SELECTOR>

button(s), select the fixtures to

setup.

4. Using the

<LEFT/RIGhT>

buttons, select the channel to adjust.

5. To enable the strobe function on the channel selected, press the

<EDIT/REC>

button.

6. To disable the strobe function on the channel selected, press

<DEL/

CLEAR>.

Repeat steps 2-7 to adjust additional channels/fixtures as desired.

8. Hold

<EDIT/REC>

for 3 seconds to exit programming mode. The

LED indicator above the

<EDIT/REC>

button will extinguish.

3.5.5.2 Strobe Playback

Allows the user to strobe the current playback.

Note:

Strobe operates even

when the

<BLACKOUT>

button is active.

1. Press and hold the

<STROBE>

button. All currently selected/operat-

ing fixtures will strobe.

2. Using the

<STROBE SPEED>

fader, adjust the strobe speed, from 1

to 20 flashes per second.

3. Release the

<STROBE>

button, and strobing will stop.

3.5.6 Blackout

Allows the user to stop all fixture output immediately (except while strobing

is active).

1. Press the

<BLACKOUT>

button. All output will cease. The LED

indicator will illuminate.

2. Press the

<BLACKOUT>

button again, and playback will resume

Summary of Contents for Kontrol 5


















Search results

Summary of Contents for Kontrol 5

Reviews:

Related manuals for Kontrol 5

Brands by name

Popular brands

Blizzard Lighting Kontrol 5, Manual

Search results

Summary of Contents for Kontrol 5

Reviews:

Related manuals for Kontrol 5

Brands by name

Popular brands