Blizzard Lighting G-Max 200, User Manual

Page: 13 / 20

Page 13
G-Max™ 200 Manual Rev. A © 2019 Blizzard Lighting, LLC
Control Panel Menu Structure
Address 001-512 Set the starting address from 001-512
Display
Customize the
display features.
Direction Invert Rotate display by 180°
Normal Normal
Light 01 MIN Display turns off after 1m of inactivity
05 MIN Display turns off after 5m of inactivity
08 MIN Display turns off after 8m of inactivity
On Display is always on
Menu Ret 01 MIN Return to main screen after 1m
05 MIN Return to main screen after 5m
08 MIN Return to main screen after 8m
Off Menu return is off
Flashing Off Off
On Menu will blink without a DMX signal
Return <OK> Return to Main Menu
Feature
Customize the
operating features.
PT Setup Invert P Off
On (pan invert)
Invert T Off
On (tilt invert)
SenCheck Off
On (automatic pan/tilt correction)
Return Return to Main Menu
Shortcut Off Shortcuts off
Open Use shortest distance to colors/gobos
Mode Basic 16-channel DMX Mode
Standard 19-channel DMX Mode
DMX (receive
mode)
Auto N/A
(not applicable)
DMX Signal received via DMX
Run Mode Auto Run built-in programs
Slve Set unit as a slave fixture
Off Off
Sigclear (N/A) No Off
Yes N/A
(not applicable)
DMX Reset No Off
Yes Enables reset via DMX control channel
Return <OK> Return to Main Menu
Info
View fixture status
information.
PWR On 0000-9999 Shows total hours powered on
Lamp On 0000-9999 Shows lamp total hours
Lamp Temp xxx °C Lamp temperature (celsius)
Version HM02 Operating software version
Return <OK> Return to Main Menu
Control Channel -- 000-255 Individual control of each channel
Return <OK> Return to Main Menu
Service
To enable the
"Offset", change
the calibration
value to 001.
Factory N/A Not applicable
Defaults N/A Not applicable
Offset 000-255 Adjust home position of channel functions
Built-in N/A Not applicable
Checksum 000-255 Calibration (01-10)
Return <OK> Return to Main Menu
View DMX Channel -- 000-255 View current DMX channel values
Return <OK> Return to Main Menu
Reset <OK> Reset fixture