Page 12
MAX L™ User Manual - Rev. A
© 2020 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Starting DMX Address:
1.) Navigate the main menu until you reach
Addr
, and press the
<ENTER>
button. Then use the
<UP/DOWN>
buttons to select a
starting DMX address ranging from 1-512, and press
<ENTER>
.
DMX Channel Mode:
1.) Navigate the main menu to the last option, which is the channel
mode selection, and press the
<ENTER>
button. Then use the
<UP/
DOWN>
buttons to select
1Ch
,
2Ch1
,
2Ch2
,
3Ch1
,
3Ch2
,
3Ch3
,
4Ch
, or
6Ch
, and press the
<ENTER>
button to confirm.
M/S Mode:
1.) Daisy chain the DMX input/output connections of the fixtures.
2.) On the secondary fixtures, navigate to
SLAV
and press
<ENTER>
.
3.) Your secondary fixtures will now follow the first fixture.
Auto, Sound Active, & Manual Adjustments
Allows a single or daisy chained units to run factory installed programs.
Auto Mode:
1.) Navigate the menu until you reach
AUTO
, and press
<ENTER>
.
Color Jump & Color Fade:
1.) Navigate the menu until you reach
JU00
(Color Jump), or
FA00
(Color Fade), and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to highlight
00-99
(slow <--> fast
effect speed)
, and press
<ENTER>
.
3.) Then to add strobe to the effect, use the
<UP/DOWN>
buttons to
highlight
JF00
(in color jump), or
AU00
(in color fade), and press the
<ENTER>
button.
4.) Use the
<UP/DOWN>
buttons to highlight
00-99
(slow to fast),
and press
<ENTER>
.
Sound Active Mode:
1.) Navigate the menu until you reach
SOUN
, and press
<ENTER>
.
2.) Then to adjust mic sensitivity, use the
<UP/DOWN>
buttons to
select from
S000 - S099
(decrease <--> increase).
Color Mixing and Presets:
1.) Navigate to
C000
(mixing) or
CN00
(preset), and press
<ENTER>
.
2.) For manual color mixing, adjust the
Red
(C1),
Green
(C2), and
Blue
(C3) intensity levels from 0-255, and press the
<ENTER>
button.
3.) For preset colors, highlight
01-07
and press
<ENTER>
.
