Notice:
The following steps are only a general guide to
assist in the assembly of your Blix bike and not a complete
guide of all aspects of the assembly. Refer to the assembly
video at support.blixbike.com for detailed instructions. We
recommend you consult a qualified bike mechanic to assist
in the assembly, service and maintenance of your bike.
Step 1:
Remove the bike from the box and set it on a smooth, flat surface.
Remove all packaging material from the bike and carefully cut the
zip-ties attaching the handlebars and wheel to the frame. Make sure
the below items are included in the package. Contact Blix if any items
are missing.
Step 2:
Rotate the handlebar stem upwards and tighten
the knob firmly.
Step 3:
Insert the upper part of the handlebar
stem into the lower handlebar bar stem on
the bike. Adjust desired height and tighten
clamp as firmly as possible to avoid vibration
in the handlebar while riding.
www.blixbike.com | 855-655-2549 | [email protected]
• The Vika+
• Pedals
• Saddle
• Battery and keys
• Charger
• Fender for front wheel
• Front headlight
• Two magnets that
keeps the bike folded
• Tool kit
• Manual
Step 4:
Unfold the frame and firmly secure
the latch at the center of the frame
as shown in the Vika+ assembly video
at support.blixbike.com.
Step 5:
Install the front light to the front
fender with the included Allen
wrench and the screw on the
light.
Step 6:
Connect the light cables to the
included front light. Cable marked with
white color connects to minus (-).