4) LCD MONITOR OPERATING INSTRUCTION
Power Switch:
push this switch to open the monitor, the indicate light
turns on, the monitor begin to work,
push again to turn off the monitor.
Simulating measure increase:
increase the picture brightness, color saturation, contrast, hue and volume total five contents,
you can adjust the content associate with the key
3
.
Simulating Switch:
according to personal favor you can adjust each simulating measure, press this button, to
choose the simulating measure, press this button, it will display the content as the order:
Brightness -color-saturation -Contrast-hue-volume. Decide which content that need to adjust.
Press key
or
again to adjust this content. (It will be effective only for the hue adjustment in
NTSC system)
Simulating measure decrease:
reduce the picture brightness, color saturation, contrast, hue and volume total five contents, you
can adjust the content associate with the key
3
.
Video Input Option:
used to choose the video signal sources. Usually, connect the video signal of VCD, DVD to Video,
photographic head or other signal to video 2, use this switch to choose them.
SYS:
picture up /down/left/right
MODE:
Press mode button to select 16:9 / 4:3 display
Power Indicate Light
Infrared receiving window: receive remote control instructions.
TFT-LCD
Connector: the power supply of the monitor and the input jack of video signal
2
5
POWER
SYS
MD
AV
+
SEL
PHONE
7
T F T L C D C O L O R M O N I T O R
