3
P r e c a u t i o n s
To prevent short circuits, be sure to disconnect the negative battery ground lead before wiring the system up.
When you finish the installation, be sure to make one more check to be sure everything is done correctly.
Reinstate all car parts that were removed.
Reconnect the negative battery ground lead.
Primary Wiring Descriptions
ELECTRICAL
PRIME CONNECTION
DESCRIPTION
12V
GROUND
REMOTE
INPUT
HIGH PASS
OUTPUT
LOW PASS
OUTPUT
B
GROUND -
REMOTE B +
RADIO/TAPE
PLAYER TO
CROSSOVER MODULE
CROSSOVER MODULE
TO ANY AMPLIFIER
CROSSOVER MODULE
TO SUB-WOOFER AMPLIFIER
Connect to the positive battery terminal (co 12V
source)
Connect to the vehicle’s chassis ground (check for good
ground)
Connect to the remote control wire (or the electrical
antenna) of the car radio/cassette deck.
Connect from pre-amp output of radio/tape player (or
CD) into
Connect from "high-pass output" of CROSSOVER module
to any amplifier input.
Connect from low-pass sub-woofer output of CROSSOVER
to sub-woofer amplifier input.
