background image

CAUTION – Use of controls or adjustments or performance of 

procedures other than those specified herein may result in hazardous 

radiation exposure.

This laser product is certified as a CLASS 3R laser product to the 

requirements of the US Federal Laser Product Performance Standard 

(FLPPS) contained in the regulations in 21 CFR Subchapter J. Class 3R 

laser products can be hazardous when directly viewed.

Avoid direct viewing of Class 3R laser energy.  For reference the FLPPS 

requirements for demonstration laser products like laser pointers are 

limited to Class 3R levels of laser energy.  This product uses diffractive 

optics to scatter the beam energy. This scattering effect causes the 

energy concentration to drop below the exposure limits for momentary 

or accidental viewing at a relatively short distance from the laser 

aperture. As similar with all bright light sources, when you operate this 

device in unsupervised general public areas, it is recommended that 

up close access to the Blisslights be restricted or prevented.

This laser display device incorporates a Class 3R laser system which, 

by itself, may be hazardous. However, this laser display device 

incorporates a protective housing and diffractive holographic optics in 

the machine design such that there is no exposure or human access 

to laser radiation during operation or maintenance above the Class 

3R limits.  Each individual laser beam power is under 5mw which is less 

than a standard laser pointer.

UNDER NO CIRCUMSTANCE shall attempts be made to open the 

protective housing or operate the device if the aperture windows are 

damaged.

All service to this laser display device requiring the protective housing 

to be opened and/ or removed shall be performed by Blisslights service 

personnel or their authorized agents. Opening the BlissLights protective 

housing voids the warranty.

NO LASERS SHOULD BE POINTED INTO THE SKY WITH 10 NAUTICAL MILES 

OF AN AIRPORT. IF YOU ARE LOCATED WITHIN THIS SPECIFIC PERIMETER 

WE RECOMMEND THE LASERS BE POINTED DOWN AT THE GROUND SO NO 

STRAY BEAMS ARE PROJECTED INTO THE AIR.

Notice

1

Reviews: