Install and replace battery
Installation
Remove the battery lid and install the battery. Orient the
battery so the + symbol is facing up. Insert the battery
and make sure it is seated and held in the socket by the
plastic snap legs.
Reinstall the battery cover.
Replacement
If the group channels number no longer lights up or the
product being controlled isn't responding anymore,
replace the used battery with a new CR2450 battery.
Use a small flat head screw driver and carefully remove
the battery as seen in the figure.
Disposal instruction
Batteries should never be thrown away or incinerated
but disposed of in accordance with the local regulations
concerning battery disposal. Contact your local
equipment supplier representative for information about
the waste collection.
Add or remove with Bliss® app
With the Bliss® app, go to the settings menu of each blind
and follow the step-by-step guidelines to add or remove
remotes.
Add a remote
To operate a Bliss® blind with a remote, it has to be paired
first to a group channel. The pairing proces can done directly
to a Bliss® motor or by using the Bliss® App.
Direct pairing
Step 1
Choose group channel
Use the navigation keys to select a
channel you want to add the blind.
Step 2
Find 'C' button
Behind the battery lid, find a small
button marked with 'C'.
Perform next steps within 8
seconds.
Step 3
Pairing mode
Press and hold the setting button
IV
on the motor until it jogs.
Step 4
Confirm
Press and hold the 'C' button
on the remote until the
motor jogs to confirm.
IV
Location of setting button varies per product type as shown in 3
examples below.
Bliss® remote control model RW5
2
rev. 1.2 (02/2021)
3
3.1
3.2
3.3
4
5
5.1
