Package Contents
Make sure all parts are present & place
them side by side for easy identification.
STEP 1
Find a healthy, strong hardwood tree that has a branch* that stretches at least 8
feet (2.4m) from its trunk and has a circumference** between 25
1
/
4
to 100 inches
(64.1 to 254cm). The tree branch should be at least 8 feet (2.4m) from the ground.
The tree trunk should have a circumference of at least 25
1
/
4
inches (64.1cm). The
tree and its branch should be strong enough to hold at least 200 lbs. (90.7 kgs.)***.
Clear the surrounding ground of debris prior to installing your swing.
Make sure
the tree branch does not stretch: into a road, sidewalk, or street; over a fence;
someone else’s property; or any other obstacle.
*The tree branch must allow at least 12 inches (30.5cm) of clearance between the skateboard swing
& ground. The skateboard swing ropes are about 66 inches (167.6cm) in length.
**9-ft tree straps can only wrap around a tree branch of a max 100-inch (254cm) circumference.
Helpful hint: wrap tree straps around the tree branch for height adjusting purposes.
***Please note that the skateboard swing can only hold a person weighing up to 200 lbs.
Preassembled Skateboard Swing has:
4 Ropes
4 ‘O’ Rings
Wooden skateboard, &
Wooden handles
A
B
C
D
A
B
C
D
x1
x2
x2
PART
1
2
3
NAME
QTY
Preassembled
Skateboard Swing
Carabiner Hooks
w/ Screw Lock
9-Ft Tree Straps
ASSEMBLY INSTRUCTIONS
AFTER READING ALL THE SAFETY INFORMATION ON
THIS PAGE AND THE FIRST PAGE, YOU MAY NOW
START TO ASSEMBLE YOUR
WOODEN SKATEBOARD SWING
USING THE FOLLOWING DIRECTIONS
CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS
