Page 2 / 28
R536 _TTUG01_EN
Thank you for choosing the Blink R536 portable router.
This device doesn’t need wires, cables, or software to
configure it through your Web browser.
This guide describes the browser Interface that allows you to configure the R536. For information about setting up
your device, device maintenance and care, etc., consult the printed Quick Start Guide that came with your device.
We recommend you read this manual before using the R536.
Part 1
Using the R536
Charging the R536 Device
Note
The battery should be fully charged before using the R536 for the first time. We recommend an initial charge time
of approximately 3 hours. When fully charged, a solid green light will appear in ‘Battery’ display on the device.
A
red
or orange light indicates you need to re-charge. Included in your R536 package is an USB Power Adapter.
Opening the Browser Interface
How to Connect to the R536
1. Turn on the R536 and ensure your WiFi is enabled on your PC or laptop. You can view your available wireless
networks by going through the control panel, network connections or system tray (lower right hand corner of your
screen).
2. Select “BLINK XXXX” as your wireless network.
Summary of Contents for R536
Page 6: ...Page 6 28 R536 _TTUG01_EN ...
