SAVE THESE INSTRUCTIONS
WARNING: RISK OF ELECTRIC SHOCK
Do not remove the cover or attempt to open the enclosure. No user serviceable parts inside. Refer servicing to
qualified service personnel.
WARNING: RISK OF ELECTRIC SHOCK
•
Do not touch live electrical parts.
•
Incorrect connections may cause electric shock.
•
Do not Disconnect Under Load.
WARNING: This equipment is intended only for charging vehicles that do not
require ventilation during charging. Please refer to your vehicle’s owner’s manual
to determine ventilation requirements.
WARNING: Do not use extender cables to increase the length of the charging cable.
Maximum length is limited to 25 feet by the National Fire Protection Agency.
WARNING: Do not drag the charge point by input power cord.
CAUTION: Do not expose to liquid, vapor or rain.
CAUTION: If this unit is installed outdoors, the outlet must be rated for outdoor
installation. The outlet must be installed properly to maintain the proper NEMA
rating of the enclosure.
•
Installation work and electrical wiring must be done by qualified person(s) in
accordance with all applicable codes and standards, including fire-rated
construction.
•
Do not touch the terminals or other current-carrying parts.
•
Take care not to drill into any pipes or power lines beneath the surface during
mounting holes preparation. Use power line / metal detector.
•
Do not trample or drive over the product’s cables.
•
Do not put any foreign objects into the enclosure.
•
Do not start the engine when the charging connector is still connected.
CAUTION: Do not use this product if there is any damage to the unit. Send the unit
back to the manufacturer in the event the unit is not operational.
Basic/Smart/Intelligent Charger-32A
Installation Manual Rev. 4.0
BlinkCharging.com • (888) 998.2546
©2021 Blink Charging Co. • NASDAQ: BLNK
I
V
