Panel Blind Installation Guide
Checklist:
You will need the following to perform the installation.
Drill with hammer function for masonry (with 5.5mm drill bit).
Screwdriver (Phillips)
Measuring tape
Marker (pencil)
Ruler (recommended)
Step ladder
Spirit level (recommended)
Hammer (not required but ideal)
Vacuum to clean dust from drilling
Note.
For wallboard or plaster: Use hollow wall anchors for added support (not supplied).
For concrete, stone, brick or tile: Use an appropriate drill bit (not supplied) and screws/plugs (provided).
For metal surfaces: Pre-drill holes before fastening the screws.
Parts
Facefix (Outside) Mounting Bracket
Pelmet Bracket
Recess (Inside Mounting Bracket)
Hanging your blind:
