Page 10
● Increase cycle time. If the drink is mixing well but has not had enough
time for complete blending, try a longer cycle (usually by using a higher
button number to start the blender) or touch and hold the “Pulse” button
for required extra blending time.
● Make sure the drive shaft on the jar is fully engaged into the drive
socket or that the blade is firmly affixed to the drive shaft.
TRIED EVERYTHING?
If none of the preceding suggestions work,
contact your Blendtec service agent for further assistance.
5.5 CLEAN BLENDER JAR DAILY
1. Using hot tap water, add 4 cups (1liter) of water and 1 1/2 teaspoons
(7 ml) of liquid dish washing soap to the blender jar.
2. Place the lid tightly onto the jar. Place the blender jar on the motor
and press the “pulse” button for 15 seconds.
3. Rinse with clear water until all soap is rinsed from jar and lid.
4. Store the jar right side up wherever possible. If jars are stored upside
down, insure that no water is allowed to stand in the bottom around the
blade drive shaft.
5. 64 ounce jars may be stacked one inside the other, but insure that the
handles are alternated. NEVER STACK THESE JARS WITH HANDLES
INTERLOCKED!
NOTE: When washing the blender jar in a dishwasher, the jar should
be placed on the top rack. Blender jars are dishwasher safe up to 220
degrees Fahrenheit (104 degrees Celsius).
5.6 LONG-TERM SANITATION OF JAR
1. For long-term sanitation, periodically fill the blender jar with hot tap
water.
2. Add 1 teaspoon (5 ml) of liquid chlorine bleach.
3. Stir for 10 seconds to mix water and bleach. Let mixture stand in
blender jar for 5 minutes.
4. Empty water/bleach mixture. Store jar as described in section 5.5.
Summary of Contents for ez Blender
Page 1: ...o p e r a t i o n s m a n u a l BRAWN BRAINS BLENDTEC ez Blender ...
Page 2: ......
Page 7: ...Page 5 ...
