background image

 

 

PLAYBACK 

 
The Delaydelus can playback four samples simultaneously using the left and right channels. 
Select a sample by patching it to the left or right most banana plug jack.  
When the trigger button on the left or right is pressed this sample will play 
The rate of playback is controlled by the right and left pitch knobs. When the knob is at 12:00 the sample will playback 
at normal speed. Fully to the right it will play at 2x speed.  
The left side of the knob slows down until about 9:00 where the sample will start playing in reverse, starting very 
slowly then going to 2x speed when fully turned to the left.  
Multiple samples can be selected by connecting the banana patch cables to each other using the holes on their sides. 
 
The volume knob controls the output level post delay. 
 

DELAY 

Both channels, as well as the input in some modes, pass through the stereo delay.  
Delay time is set by the time knob on the middle left. When all the way to the left the dealy time is about ________ 
seconds. 

Summary of Contents for Delaydelus 2

Page 1: ...y to the right it will play at 2x speed The left side of the knob slows down until about 9 00 where the sample will start playing in reverse starting very slowly then going to 2x speed when fully turned to the left Multiple samples can be selected by connecting the banana patch cables to each other using the holes on their sides The volume knob controls the output level post delay DELAY Both chann...

Page 2: ...s starting with 1 10 it can find in the root directory The file name can be as long as you want as long as it starts with 1 through 10 If multiple things start with the same number the one modified last will be loaded Any files not starting with 1 10 in the root as well as any directories will be ignored Files can be stereo or mono 8 or 16 bit WAV files If the file sounds distorted it is probably ...

Page 3: ...h the device Samples only play back while the button is held down In all modes the light will change brightness based on the audio output level LOOPING Each channel can be set to loop the selected samples To enable looping for a channel hold its button down and press the mode button The light will blink white Now when you press the button the sample will start playing in a loop Press it again to s...

Page 4: ...8x 1 16x 1 32x To exit the sync mode turn the feedback knob all the way to the left then back to the desired level Sync out Pulses will always be sent out of this jack based on the delay rate 4 pulses are sent per delay time so with a 1 2 second delay 8 are sent per second CV FM in responds to is 5V to 8V The CV envelope follower outputs 0 8V Trigger and sync in responds to 3V Trigger and sync out...

Reviews: