8
SECTION 5 - DESCRIPTION BLEC CULTIPACK SEEDER
MODELS CP36- CP42
Both models are designed to sow grass seed and incorporate into top soiled areas
Based on the following proven working principle. The twin front cast iron rollers
Have serrated rings which penetrate the soil, leaving a pattern of ridges and small
Indentations in the top 20mm (3/4”). A rear seeder unit equipped with a
Seed/fertiliser hopper, evenly spreads grass seed or fertiliser at ta required amount
Determined by the adjustable cam guage and lever fitted to the rear of the hopper,
The seed falls into and in between the small pockets in the soil. To complete the
process a rear ring roller splits the ridges and presses down the seedlings into the
Soil, leaving the seedlings incorporated in the top 20mm (3/4”) for ideal germination.
It is important slewing clutches are fitted on the tiller for ease of turning. A footplate
Mounted on the rear allows the operator to ride on for easier operation and less fatigue.
I
IMPORTANT
DESCRIPTION
The BLEC range of CULTIPACK SEEDERS have been designed to mount onto
Standard type power tillers or two wheel tractors, as they are sometimes known.
Before fitting it is important you have the correct model seeder to suit your power
Tiller.
WORKING PRINCIPLE
Make sure only experienced workers over 16 use this seeder for safety reasons.
Summary of Contents for CP Series
Page 2: ...2 ...
Page 15: ...15 SECTION 7 PREPARING FOR USE BLEC CULTI PACK SEEDER MODELS CP36 CP42 NOTES ...
Page 35: ...35 ...
Page 38: ...38 ...