ADDITIONAL INFORMATION
UPDATING THE SOFTWARE
DEFAULT BUTTON REACTION DEPENDING
ON THE CONTROLLED PRODUCT
Prepare the remote control for updating by pairing it with the controller.
Next connect to the controller with the phone by using the wBox applica-
tion and go to its settings menu.
“If a new version of the software is released, the update icon will appear in
the “Remote controls” section of the remote control. Clicking on the icon will
appear an appropriate with the message about the possibility of updating
the software in the remote control. Then is necessary within a maximum of
30 seconds, induce the remote control into the update mode following the
remote control pairing procedure in accordance with points a) - b). Howe-
ver, in the point c), instead of pressing the button (1), it is necessary to
press the button (3) for a long time (about 8 seconds). The LED will light up
on the remote controller and will lit for the entire duration of the update
(about 3 minutes).”
After successful update, the diode will immediately turn off. If the LED
blink - an error has occurred, then repeat the whole procedure.
www.blebox.eu
or send us an email to: [email protected]
support is available at [email protected]
made in Eurpe
5
SECURITY
Ultra-safe communication
Pilot simpleRemote uses cryptographic technologies used in banking,
many times more effective than those currently used, including two-
way key negotiation, confirmation communication and encryption using
elliptical curves. “
number of buttons
4
signaling
LED diode
number of connected devices /
channel
7
mounting bracket
magnetic, screw and expansion plug
included
dimensions
148 x 46 x 16 mm
weight
72 grams, with batteries
power supply
2x LR03 / AAA alkaline battery
housing
high quality white ABS plastic
controller operating temperature
do -20°C do +50°C
radio frequency
2.4 GHz
transmission protocol
μWiFi
transmission type
with confirmation, encrypted
range
up to 100 m in open spaces, up to 40 m.
in buildings (depending on the construc-
tion and terrain)
encryption
set of 512-bit keys, with use of elliptic
curves and key negotiation for each
transmission
TECHNICAL SPECIFICATIONS
for more information visit our website www.blebox.eu
CHANGING DEFAULT KEY FUNCTIONS
It is possible to change the default actions of the wBox controller per-
formed after pressing a given button on the remote control. Connect to
a given controller with a phone with the the wBox application and go to
its settings menu. In the “Remotes” section, select a given remote, then
go to its action, where you can change the type of action for the selected
key (1) - (4).
Device
boton 1
boton 2
boton 3
shutterBox
shuterBoxDC
rollerGate
up
stop
down
gateBox
first output
second output
without
doorBox
open
without
without
dimmerBox
increase by 33%
switch off / switch
on (last)
decrease by 33%
switchBox
switchBoxDC
switch on
change the output
state
switch off
switchBoxD
change the output
state 1
change the output
state 2
change the output
state
wLightBox
switch off / switch
on (last)
set blue color
set relax effect
wLightBoxS
increase by 33%
switch off / switch
on (last)
decrease by 33%
saunaBox
switch off / switch
on (last)
increase by 33%
decrease by 33%
4
If the button (4) is not visible, the wBox application and controller fir
-
mware should be updated.