TIME AND LOCATION OF THE DEVICE
Go to settings, to the “Time and location” section. In the “Device time” tab, se
-
lect your region and location from the list, confirming the changes with the
“Save” button. The device will synchronize its time with the NTP time server
(if the controller is in a WiFi network with Internet access) or will download
the time from the phone / tablet. Since the controller does not have a clock
backup battery, the clock resets itself when the power is disconnected. Hence,
it is recommended that the controller is always connected to a WiFi network
with internet access so that it can automatically synchronize its clock. This is
especially important in controllers that have the function of working with the
schedule.
You can specify the location of the controller using your smartphone or tablet.
In the “Device location” tab click the “Set location” button. The application will
ask whether to share the location - allow. The approximate coordinates of
your location should appear in the “Coordinates” box. If the “Set location” but
-
ton flashes red with “Error” or the “Coordinates” field has not changed the va
-
lue from “Not set” to numerical data there has been a failure in retrieving the
location. You should then make sure that the phone / tablet has a GPS module
and that the wBox application has access rights to download the location in
the phone settings. Setting the location is especially important in controllers
that have the function of working with the schedule, in which the schedule is
based on sunrise and sunset.
7
SOFTWARE UPDATE
HELP
8
9
In order to update the software in the controller it must be connected to
the home WiFi network (see “WiFi connection settings” section) which is
connected to the Internet. Go to settings, to the “Details, update and help”
section and click the “Check for update” button. If an update is available the
button changes to “Download new software”. After clicking it, wait about 1
minute without closing the interface or taking any other actions. The device
will download the latest software and then reboot. You can read the device
ID, hardware and software versions in the device details.
The latest versions of the manual, additional informations and materials
about products are available on our website: blebox.eu
General questions: [email protected]
Service and technical support: [email protected] “
Before contacting our service, if it is possible, prepare the “Service key” of
the given controller available in its settings, in the “Details, update and help”
tab. By clicking the icon, the key will be copied to the phone’s clipboard. Pre
-
pare also the “Installation key” of the wBox application, available in the main
application menu, in the “Settings” tab.
Factory reset manual is available at: blebox.eu/start/reset
Attention! Factory reset does not remove the controller
from the user account assigned to it. The device must
be independently removed from the account - select
“Manage devices” from the main menu of the wBox
application, then select the device and click the “Remove
device” button. Alternatively, you can log into the portal.
blebox.eu system, go to the “Devices” tab, choose the
device and select “Remove device” from the top-right
“Actions” menu.
power supply
12 - 24V DC
energy consumption
< 1W (stand-by), <1,5W (at heating)
number of control outputs
1
type of control outputs
open-drain, ground control
maximum load
6W
type of measurement
rainfall detection (start and end)
sensor heating
automatic, energy saving function
ambient temperature in the
measuring range
from 0°C to 50°C
controller operating temperature
from -20°C to 50°C
dimensions
50 x 35 x 16 mm
2
housing
plastic, covered with a polyurethane
composition not containing halogens,
self-extinguishing for thermal class B
(130°C)
type and length of the cable
5m, LIYY 3x0.25 mm
2
mounting method
holes in the mounting bracket or a
self-adhesive element (tape), mounting
bracket adapted to rotate the direction
of the cable exit, horizontal installation
in a place exposed to rain
protection level
IP55
protection
inverted polarization, ESD
antenna
integrated
communication standard
μWiFi, compatible with WiFi, 802.11g
transmission type
bi-directional, encrypted
encryption
WPA2-PSK and authenticated encryp
-
tion with associated data (AEAD)
modes
direct connection (as Access Point),
Wi-Fi connection via a stan- dard
router, connection with access from
any location in the world (requires only
access to the Internet)
radio frequency
2.4 GHz
API
open
compatible devices and systems
Apple iPhone, Apple iPad, iPad Mini,
Android, computers and mobile devices
supporting HTML5
TECHNICAL SPECIFICATIONS
www.blebox.eu
made in Eurpe
for more information visit www.blebox.eu
or send an email to: [email protected]
technical support is available
