Thermal Power Control
Adjusting the thermal output. (The highest
temperature attainable will be about 2,500
°F)
After ignition, turn the Air Control Knob either
Clockwise to the right or Counter Clockwise to the left
for necessary thermal power adjustments. This will
provide a softer yellow flame.
Gas Refilling
Use
Blazer® Brand Butane
gas, or comparable premium grade butane, for best results.
Shake butane canister a few times to warm up fuel, insert the canister nozzle vertically
down into the gas refill opening found at the base of the torch.
Move the nozzle slightly up and down to release the butane. Stop refilling when the fuel
gas starts to overflow. Typically 5-10 seconds. The GB2001 plastic base can then be
reattached.
WARNING:
The GB2001 should be handled by literate adults, or under constant adult supervision. It
is essential that the following operating procedures be read and understood before
attempting to light or use the
BLAZER® GB2001
torch. These procedures MUST be
carefully observed in order to promote safe usage.
Keep out of the reach of children
Contains Flammable butane gas
Do not store near heat.
Keep Torch away from sparks when igniting
Keep
BLAZER®
gas torch away from open fires and avoid temperatures over 50
degrees C.
Do not expose to the sun for a long period
BLAZER®
gas torch has been adjusted for perfect functioning.
Do not make technical changes
When refilling keep away from open flame or sparks
Please make sure after using
BLAZER®
gas torch that the gas flow control knob is
firmly closed and the flame completely extinguished.
