USER MANUAL |
6
preparation
Plan where the ductwork will be located . Install proper-sized duct work, and roof or wall
cap, depending on where you will be venting your hood . Recommended and most com-
mon installations are shown in the venting diagrams on the previous page . Adjust your
measurements to accomodate heights of ceilings, cabinets, or rangetops .
wall hood installation
step 1
Secure hood to wall stud using
screws . If necessary, use additional
mounting screws and wall anchors . If
your stud does not line up with the
provided screw holes, you may drill
into the stainless steel .
Note: These are suggested mounting
points only . Find the stud closest to
these mounting points, and create new
holes in the hood there .
--optional--
If not using a duct cover, using
screws, make sure top mount-
ing screws are secured into soffit
or cabinet framing use additional
mounting screws, if necessary .
Installation Tip:
Use the mounting bracket (pictured below) to help secure the hood
to the wall .