Blaze BLZ-4LTE Use & Care Manual Download Page 1

Page: 1 / 41

Blaze Outdoor Products Instructional Book

Page | 1

Version 1.1

USE & CARE GUIDE

GAS GRILLS BLZ-4LTE(NG/LP)

ATTENTION:

INSTALLER: PLEASE LEAVE THESE INSTRUCTIONS WITH THE CONSUMER.

CONSUMER: PLEASE READ & RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE AND BEFORE

INSTALLING OR OPERATING.

- CONTACT INFORMATION -

Blaze Outdoor Products: 6620 Greenwell Springs Rd, Baton Rouge, LA

70805 USA Phone: 866-976-9510 email:

[email protected]

BLAZEGRILLS.COM

DANGER

- IF YOU SMELL GAS:

I) Shut off the gas supply to the appliance at its source.

2) Extinguish any open flames.

3) Open grill hood to release any accumulation of gas

vapor.

4) If a gas odor persists, keep away from your

appliance and contact your gas supplier or fire

department immediately.

WARNING

I) Do not store or use gasoline or other flammable

liquids or vapor in the vicinity of this or any other

appliance

2) A LP cylinder not connected for use shall not be

stored in the vicinity of this or any other appliances.

Summary of Contents for BLZ-4LTE










































Search results

Summary of Contents for BLZ-4LTE

Reviews:

Related manuals for BLZ-4LTE

Brands by name

Popular brands

Blaze BLZ-4LTE, Use & Care Manual

Search results

Summary of Contents for BLZ-4LTE

Reviews:

Related manuals for BLZ-4LTE

Brands by name

Popular brands